VBeam Laser: Everything You Need to Know

The VBeam Laser is called a vascular laser because it tends to be good for treating blood vessel conditions. It’s also known as the “vascular diode laser,” and that name comes from its ability to treat veins as well as arteries.

The VBeam Laser works by heating up tissue with light energy. This causes collagen fibers in the skin to contract, which helps to tighten the area being treated. It can be used on any part of your body, including your face, neck, hands, feet, legs, arms, or back.

The VBeam Laser uses a wavelength of 810 nm, which means it has a peak absorption rate at about 820 nm. That means that the laser beam will heat up the surface of the skin, but not penetrate into deeper layers of the skin.

How Does the VBeam Laser Work?

The VBeam laser works by using a specific wavelength of infrared light (810nm) to target certain molecules within the cells of the dermis layer of the skin. These molecules are responsible for producing collagen, elastin, and other proteins that make up our connective tissues. When these molecules are targeted and destroyed by the laser, they cause the collagen fibers to contract, resulting in tightening of the affected areas.

The VBeam laser works by emitting light energy into the skin. This causes the collagen fibers in the upper layers of the skin to contract, which gives the skin a smoother look. As the collagen contracts, it pulls the underlying tissue upward, creating an uplift effect.

The VBeam laser is different from traditional lasers because it emits light waves rather than heat. Heat damages the cells underneath the surface of the skin, while light waves penetrate only the top few millimetres of the skin without damaging anything below.

How Long Does the Procedure Take?

Most patients will require about 30 minutes for each session, but we recommend scheduling at least one appointment per week for optimal results.

There are no side effects to the treatment and it is safe for all skin types. The only thing you need to do is keep your face clean and moisturized with a good quality facial cleanser and lotion.

Why Should I Use the VBeam Laser?

The Vbeam is a medical device that uses laser technology to treat conditions such as acne, rosacea and other skin disorders. The Vbeam is FDA cleared for use in treating facial redness, acne, and rosacea. It is also approved for treatment of spider veins and port wine stains.

VBeam laser treatments are effective for a variety of skin conditions. They work especially well for improving the appearance of fine lines and wrinkles, reducing the size of pores, and removing unwanted hair.

VBeam laser treatments are safe and painless. Patients report minimal discomfort during and after the procedure. There is no downtime associated with this type of treatment.

The VBeam laser is an excellent choice for people who want to reduce fine lines and wrinkles around their eyes, mouth, nose, forehead, cheeks, chin, neck, chest, abdomen, thighs, buttocks, calves, knees, ankles, and toes.

It is also a great option for those who have had surgery in the past and would like to improve the appearance of scars.

It is also ideal for removing unwanted hair, such as underarms, bikini line, pubic region, and facial hair.

Expect

During your first visit, you will meet with one of our doctors who will discuss your condition and determine whether the VBeam laser would be appropriate for you. You may experience some mild swelling and bruising around the treated area. Your doctor will provide instructions on how to care for your skin following your treatment.

During your second appointment, we will perform a thorough examination of your skin to ensure that there are no contraindications to the use of the VBeam laser. We will then review the results of your initial consultation and explain what to expect during your treatment.

You will receive a topical numbing cream before each session. At the beginning of each treatment, you will lie down on a table where your doctor will apply the laser to your skin. Afterward, you will sit back and relax until the treatment is complete.

Duration

Results can last anywhere from 6 months to 2 years depending on several factors including:

• Age at time of treatment

• Size of the area being treated

• Number of treatments

• Individual response to treatment

VBeam Laser procedure does not take too long per treatment

The average time of a VBeam procedure is approximately 30 minutes. The actual amount of time will vary depending on how many areas are treated and what type of skin condition is being addressed.

What to Expect During the Procedure:

During the treatment, you may feel some pressure or discomfort as the laser penetrates your skin. You may also experience mild redness for up to 24 hours after the procedure. This is normal and should subside within 1-2 days.

After the procedure, you will be given specific instructions on how to care and protect your skin.

Therefore, most patients require multiple treatments over a period of 3-6 months. Some individuals need only one treatment. It’s important to keep in mind that the number of treatments required will depend upon the size of the area being treated, the depth of the tissue, and the individual response to treatment.

Benefits

– It’s proven to improve the appearance of fine lines, wrinkles and sagging skin. It can also reduce the visibility of scars.

– It’s noninvasive and has no downtime. Most patients report minimal discomfort during and after the treatment.

– It’ll give you a natural looking lift. No surgery required!

– It’s easy to maintain. Just follow our simple instructions and use a good quality facial cleansers and lotions.

Side Effects or Risks

There are always potential side effects when performing a medical procedure. While most of them are minor, others can be more serious. For example, the VBeam laser can cause temporary redness and swelling in the area where it was applied. This is normal and should go away on its own in just a few days.

However, if you experience any of the following symptoms, call your doctor right away:

• Swelling that lasts longer than two weeks

• Pain that doesn’t go away

• Fever

• Severe headache

If you experience any of these symptoms, you need to see a physician immediately. You could suffer from a life-threatening condition if left untreated.

The VBeam works best when used in conjunction with other treatments like Botox® Cosmetic injections, chemical peels, microdermabrasion, laser resurfacing, and dermal fillers.

What Are Some Common Uses of the VBeam Laser Treatment?

VBeam lasers are often used to remove tattoos, scars, stretch marks, birthmarks, and warts. They are also effective for treating acne scarring, sun damage, and even some types of rosacea.

VBeam lasers are also very useful for improving the appearance of cellulite. Because the laser penetrates only the top few millimeters of the dermis layer, it does not affect the subdermal fat layer, so there is no risk of causing dimpling or bruising.

Who Is a Good Candidate for the VBeam Laser Therapy?

Anyone who wants to get rid of fine lines, wrinkles, and sagging skin is a good candidate for this treatment. It may be especially helpful for people who have undergone extensive plastic surgeries, such as facelifts, tummy tucks, liposuction, breast augmentation, eyelid lifts, etc. It can also help people who have suffered from severe sunburns, broken capillaries, and other skin problems.

People who don’t mind having a little bit of redness after the procedure are usually able to tolerate the effects of the VBeam laser therapy.

Vbeam Prima

The Vbeam® Prima is a non-invasive, painless and relaxing treatment that uses radio frequency (RF) energy to stimulate collagen production in the dermis. It stimulates new cell growth and increases circulation of blood flow resulting in smoother skin texture and improved elasticity.

The Vbeam® Prima works by delivering RF energy into the dermal layer of the skin using an applicator wand. This creates heat which then stimulates the body’s natural healing response. The Vbeam® Primas unique technology delivers deep penetrating RF energy to the deeper layers of the skin where it can penetrate up to 2mm below the surface. This allows for more effective results than superficial treatments such as microdermabrasion or chemical peels.

Vbeam® Prima is suitable for all skin types including sensitive skin, rosacea, acne prone skin, sun damaged skin, hyperpigmentation and scarring.

What you will experience:

• A soothing sensation when applied to the skin

• No discomfort during treatment

• No downtime required

• Results last 3 months – 6 months depending on skin type

Conclusion

The Vbeam Laser has been proven to be one of the most effective treatments available for treating acne scars, fine lines and wrinkles, hyperpigmentation, sun damage, stretch marks, scarring from surgery or injury, and other skin problems.

The Vbeam Laser can deliver up to 15% deeper penetration than any other lasers on the market today. This means you get better results with less downtime.

There are no side effects associated with this treatment. You will not experience redness or swelling after the procedure.

The Vbeam laser is FDA cleared and CE marked.

It’s easy to use: just place the device over the area to be treated and press the button.

Related Articles

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Stay Connected

22,037FansLike
3,422FollowersFollow
0SubscribersSubscribe

Latest Articles