Gorilla glue is a sticky substance secreted by certain species of primates such as gorillas, chimpanzees and orangutans. The glue is used to attach leaves and other vegetation to trees.
Gorilla glue is very strong and can cause serious injuries. If you get stuck with gorilla glue, you should immediately wash the affected area with soap and water. Then apply an antiseptic cream to prevent infection.
Steps to Remove Gorilla Glue from Your Skin
1. Wash your hands thoroughly using soap and warm water.
2. Use a clean towel to dry off your hands.
3. Apply a small amount of baby oil on your fingers. Rub them together until they are slippery. This will help loosen up the gorilla glue that has adhered to your skin.
4. Using tweezers, carefully pull out the gorilla glue. It may be difficult at first, but keep trying. Once it comes loose, gently wipe it away with a paper towel.
5. Rinse your hands again with soap and water. Dry them well with another clean towel.
6. Apply a thin layer of petroleum jelly over the affected area. Let it sit for about 10 minutes before rinsing it off.
7. Repeat steps 3 through 5 if necessary.
8. You’re done!
Is Gorilla Glue on Skin Harmful?
Yes, gorilla glue is toxic. It can irritate the skin and cause blisters. If you have any open wounds in the area where you got stuck with gorilla glue, make sure you cover them with antibiotic ointment.
How to Remove Gorilla Glue From Fingers?
If you get stuck with gorilla glues while playing sports or doing chores around the house, try these tips:
1. Wet your finger with a wet cloth and rub it against a piece of sandpaper. This will help remove the glue from your skin.
2. Try soaking your finger in hot water. The heat will soften the glue and allow you to peel it off easily.
3. If you cannot remove the gorilla glue yourself, seek medical attention right away.
4. Do not use alcohol or rubbing alcohol to remove gorilla glue. These products contain acetone, which could burn your skin.
5. After washing your hands with soap and water, do not touch anything else. Wait until your skin heals completely before touching anything else.
6. Avoid wearing rings or bracelets when removing gorilla glue. They might trap the glue under your skin.
7. Keep your fingernails trimmed short so that they don’t catch on the gorilla glue.
8. Wear rubber gloves when cleaning your hands after getting stuck with gorilla glue.
9. Make sure you take a shower after removing gorilla glue. Otherwise, the glue residue may remain on your body.
10. Don’t forget to moisturize your skin regularly.
Removing Gorilla Glue From Other Surfaces
Getting Gorilla Glue Off of Wood
1. Cut a hole in the bottom of a plastic bag large enough to fit over the affected area.
2. Put a few drops of dishwashing liquid into the bag.
3. Close the top of the bag securely.
4. Shake the bag vigorously until all the gorilla glue falls out of the bag.
5. Open the bag and let the remaining gorilla glue drip down onto the floor.
6. Wipe the surface with a damp rag.
7. Clean the area with a solution containing ammonia and water.
8. Allow the area to air-dry.
9. Use a vacuum cleaner to suck up any remaining gorilla glue.
Removing Gorilla Glue From Fabric
1. Mix equal parts vinegar and lemon juice. Pour this mixture into a spray bottle.
2. Spray the fabric directly on the gorilla glue. Let it soak for several hours.
3. Wash the fabric with warm water and detergent.
4. Squeeze some lemon juice onto the stain. Let it sit for at least 15 minutes.
5. Rub the stain with a soft brush or sponge.
6. Rinse the fabric thoroughly with cold water.
7. Hang the garment outside to dry.
8. Once dry, iron the fabric using low heat.
9. Use a dryer sheet to prevent wrinkles.
Removing Gorilla Glue From Leather
1. Soak the leather item in a solution made of one part white vinegar and two parts water.
2. Leave the leather item overnight.
3. Scrub the leather item gently with a stiff toothbrush.
4. Repeat steps 1 through 3 as needed.
5. Rinse the leather item well with clean water.
6. Dry the item with a lint roller or hair drier.
7. Apply leather conditioner if necessary.
Removing Gorilla Glue From Glass
1. Fill a bucket half full of water. Add four tablespoons of baking soda and stir well.
2. Dip a cotton ball into the mixture.
3. Place the soaked cotton ball on the affected area.
4. Press firmly for about 30 seconds.
5. Remove the cotton ball and rinse the glass with clear water.
6. Dry the glass with a towel.
7. Apply glass polish if necessary.
Removal Of Gorilla Glue From Clothing
1. If possible, wear latex gloves while handling clothing that has been glued.
2. Remove the glue by soaking the clothing in a solution of one part bleach to three parts water.
3. Let the clothing soak for 30 minutes.
4. Remove the clothing from the bleach solution and wash it under running water.
5. If the clothing is still stained after washing, repeat step 2.
6. Dry the clothing completely before storing it.
How To Remove Gorilla Glue From Carpet
1. Sprinkle carpet shampoo on the affected area. Let it sit for 10 minutes.
2. Vacuum the area.
3. Sponge the area with a mild detergent.
4. Let the area air dry.
5. Wash the area with hot water and soap.
6. Use an enzyme cleaner to get rid of stubborn stains.
7. Blot the area with a clean cloth.
8. Apply carpet sealant if necessary.
Gorilla Glue Removal Tips For Children
1. Keep children away from the glue when it’s wet.
2. Do not allow children to play with the glue.
3. When cleaning up spills, use paper towels instead of rags.
4. Never put your hands in your mouth while playing with glue.
5. Make sure you have enough ventilation around glue containers.
6. Avoid letting glue drip on carpets or furniture.
7. If you notice that your child has accidentally gotten glue on their face, immediately take them to the doctor.
8. If your child gets glue on his/her clothes, do not try to remove it yourself. Take him/her to a professional.
9. If your child gets any kind of chemical burns, go to the emergency room right away.
As you can see, there are many ways to remove gorilla glue from various surfaces. The best way to remove gorilla glue is to be prepared and know what to expect. Always read the instructions included with your product carefully. This will help ensure that you don’t end up damaging something else along with the gorilla glue. You should also always follow all safety precautions when working with chemicals.